Products

KPTuned Megasquirt ECUs

MS3-PRO Systems – $1299 with wiring harness and 3bar MAP

  • Available for nearly any configuration up to 12cylinders sequential fuel and ignition
  • On board logging and knock capability
  • Waterproof case and heavy duty connectors
  • Configured for your application from stock to high output
  • Start-up and Tuning Support with MS3 support package option ($275)
  • Boost Controller, RPM/Map switched outputs, Nitrous Control, Fan Control, 3bar and 4bar MAP Sensors (extra) Tachometer Output, EDIS support, multiple powered spark outputs must use Quadspark addition

Microsquirt v3 Systems – $435 with wiring harness and 3bar MAP

  • Brand new board design with robust surface mount components and splashproof connector
  • Available for both VW Hall Sensor or stock crank sensor and trigger wheel applications and single or dual spark output (7 pin Bosch or VR6/ABA coils)
  • Configured for your application from stock to high output
  • Start-up and Tuning Support available with support package option for MS2/uS ($175)
  • Options available: Boost Controller, RPM/Map switched outputs, Nitrous Control, Fan Control, 3bar and 4bar MAP Sensors, Tachometer Output, EDIS support, multiple powered or unpowered spark outputs – please inquire what options combinations are available

MS2 V3 Systems – $525

  • Available for both VW Hall Sensor or stock crank sensor (VR) and trigger wheel applications and single to eight spark outputs
  • Configured for your application from stock to high output
  • Start-up and Tuning Support via email included
  • Options available: Boost Controller, RPM/Map switched outputs, Nitrous Control, Fan Control, 3bar and 4bar MAP Sensors, Tachometer Output, EDIS support, multiple powered or unpowered spark outputs up to 8cyl COP

Megasquirt Accessories

Innovate LC2 Standalone System (no gauge) with sensor – $199

Innovate MXL Wideband System with gauge – $210

Innovate LC2/XD 16 full system with sensor – $399

Serial Tuning Cable – $7

GM Open Element Intake Air Temp Sensor – $20

GM Open Element Intake Air Temp Sensor with Pigtail – $23

GM Closed Element Coolant Temp Sensor- $17

GM Closed Element Coolant Temp Sensor with Pigtail – $18

GM 3 Bar MAP Sensor – $65

MS2 Processor Upgrade – $90

MS3 Processor Upgrade – $200

MS3x Upgrade – $100

10′ Wiring Harness – $100

3x Harness – $80

Megasquirt Modifications

MS V2.2 Hall/Spark Modification – $40

MS V2.2 Powered Spark Modification – $25

MS V3/V3.57 Powered Spark Modification – $15

VW 2 Wire Idle Air Valve Transistor Upgrade – $20

4bar Internal MAP Sensor Upgrade – $80

Boost Control Circuit – $25

General Output Circuit – $25

Launch Control or Table Switching – $15

Nitrous control – $45

Water/Meth Control – $25

Megasquirt Repair Services

Repair Services $75/hr labor – all repairs minimum 1hr – parts not always included in price

Comments are closed.

Follow

Get every new post delivered to your Inbox.

%d bloggers like this: